UV-A Chamber

Application * Testing Sun Light Ageing * Laboratories * Testing of Samples * Testing Effect of UVA  * Testing of Polymers * Print Ageing Testing * Testing of Coatings.

 

 

 

 

 

                Mouse over Image to Zoom

Description:

UV-A Chamber.

Lamp Module:

Complete with ACS design reflector with ACS designed lamp hood cooling.

Batch Type:

Tray provided for component holding, with slots for adjustment of distance from lamps to component.

Control Panel:

Illuminated Push Button Operation with Phase indication, Timer,  Selection of  UV lamp.

Power Supply:

Power supply built to suit any conditions.

Cooling:

Axial fan.

UV-A Chamber fabricated with MS sheets on all the sides and UV resistant Poly Carbonate sheet door in the front for loading the substrate. The UV lamps will be placed in the fabricated housing with high reflective sheet behind to reflect the UV rays in the downwards direction. The door will be provided with an interlock switch so that UV lamp will switch off if it is open at any time. A Digital timer for setting the exposure time is incorporated in the system and the UV lamp will switch off automatically after the set time. A white light normal florescent lamp is provided inside the system which will switch on automatically if the door is open.

Leakage Testing Bath

Application * Leak Testing of Auto Components * Adhesive Bonding Testing * Laboratory Instrument *  Glass Bonding. 

 

 

 

 

 

Description:

Scrubbing Machine.

Scrubbing Width

12, 18, 20, 24 up to 40 Inches.

Heater Wattage:

3 KW heaters with Blower for removing the water steins & drying. 

Models:

Single Sided, Double Sided, Deburring, Water rinse,  Squeeze Rollers, Hot Air Dryer.

Conveyor Type:

Rubber Rollers with SS Shaft

Conveyor Speed:

Up to 10 Meters per Minute.

Cooling:

Centrifugal Blowers.

Description:

Leakage Testing Bath

Bath Module:

Heater controlled water bath for testing components effect on temperature after bonding. Bath Temperature can be maintained at 100 Degree C.

Material Handling:

Fixture suitable for holding multiple components at a time.

Control Panel:

Illuminated Push Button Operation with Temperature controller, Timer and Beeper to indicate cycle time

Power Supply:

Power supply built to suit any conditions.

                Mouse over Image to Zoom

Fabricated in Stainless steel the bath would be of 3 mm SS sheet with rod heaters of 2 Kw for heating the water bath for a temperature of 80/100 degree + 2 degree centigrade for a time period of 3 to 15 min to test the leakage. The Heaters would be placed on the bottom of the bath. Digital Temperature controller will be provided for setting the Temperature and controlling the temperature inside the Water Bath. Timer with beeper for setting the time of holding the temperature will be provided. Top Cover lid for the Water Bath will be provided.

Cooling Chamber

Application * Auto Component Injection Mold Cooling Chamber * First in First Our Cooling Chamber. 

 

 

 

 


Description:

Cooling Chamber.

Size:

L 1200 MM x W 600 MM x H 750 MM.

Cooling Time:

20, 30, 40 & 60 Min.

Holders:

Component fixture to hold 80 Nos.

Drive:

Driven By Geared Motor with Sprocket & Chain Mechanism.

Speed:

Variable max up to 1 M/min.

Cooling:

Centrifugal Blowers.

                Mouse over Image to Zoom

Fabricated in mild steel CRCS material and powder coated. The Cooling Chamber will be driven by a Geared Motor and the speed can be set for 20, 30, 40 & 60 Min time duration. The system will have rods for holding 2 pieces at a time and the operator has to load manually. The components will travel inside the chamber for the set time and forced cooling are provided with blowers to bring the product to room temperature. The components will automatically fall at the output and it has to be collected in a plastic bin.

Hot Air Oven

Application * Auto Components * Drying Screen Print Dials * Adhesive Drying * PCB Manufacturing * Drying Warmish * Drying Metal Printing.

 

 

 

 

 

 


                Mouse over Image to Zoom

Fabricated in mild steel CRCS material and powder coated. The Oven will be insulated with ceramic wool to avoid dust which will happen in case of glass wool insulation. The Heaters would be placed on the bottom of the Oven and the air flow vertical to top if the tray which you are providing has perforation to pass the hot air, or the heaters would be placed in the side and the air flow would be horizontal. Air Finned Heaters of capacity 3 to 4 KW will be provided in the oven with an air flow fan of ΒΌ HP. Digital Temperature controller will be provided for setting the Temperature and controlling the temperature inside the Oven. Timer with beeper for setting the time of holding the temperature will be provided.

PCB Scrubbing Machine

Application * PCB Scrubbing Machine * Metal Oxidation Coating Scrubbing.

 

 

 

 

 

 

Description:

Hot Air Oven.

Drying Width:

12, 18, 20, 24, 25, 30, 32, 34, 38 & 40 inches.

Wattage:

1.5, 3, 5, 10, 15 & 20 Kw.

Fabrication:

Complete with ACS design with Horizontal / Vertical Hot Air Flow.

Temperature:

From 80 to 250 Degree Centigrade.

Control System:

With Temperature Controller with SSR, PID Controller with SCR or by PLC Controlled SCR.

Cooling:

Centrifugal Blowers.


                Mouse over Image to Zoom

The equipment is rugged construction fabricated with combination of MS and SS fabrication. All the shafts are manufactured by SS material which will come in contact with water. The machine consists of Scrubbing roller with oscillation and height adjustment of the brush for controlling the material removal. Followed by Deburring, water rinse and a hot air drier which will complete the operation

Custom built solutions for business development.

Our highly experienced promoters can turn any design into reality. Using practices that are considered the best quality standards of today, as well as the most modern technologies available, equipments are optimized for your production speed and will hold its own uniqueness as your business continues to grow. We are engaged in design and manufacture of UV & IR Systems required for high production rates with consistent quality which is today's need. Today we are of the well known designers & manufacturers who cater to stringent requirements of quality and productivity.

Advance Curing System has an innate understanding that as a client or prospective client you are looking for a company that can bring the most professional design ideas to your manufacturing requirements and give you a quality product that will streamline processes, increase efficiency and maximize reliability, which is why we continually adopt the latest technological advances to ensure that you benefit from innovative ideas.

Advance Curing System offer a full and complete package from initial enquiry to commissioning. Our expert specialist engineers have served the Automotive, Lighting, Heating, Printing, Coating and many other industries. Whether it be a simple hand held unit, or special purpose machine ACS has a solution for you. We have built on our skill base since our establishment in late 1994 and can now offer an extensive range of engineering resource and provide solutions up to the minute technology coupled with strong robust design.